Capping Machine

Twist-Off Vacuum Capping Machine


Twist-Off Vacuum Capping MachineThis is twist-off type capping machine for closing three or four screw metal caps onto glass bottles which is applied widely in food industry for products such as seasoning ,chili sauce, ketchup, jam, peanut butter, etc.

The machine is with function of automatic cap feeding, steam spray exhausting(for vacuum purpose of the bottle) and cap sealing.

It is equipped with frequency converter, stainless steel machine structure ,whole machine is stable and easy for operation.

Application


Twist-Off Vacuum Capping Machine Application

Features


This machine is designed for cylinder bottle. It aims at plastic inner cap and outer cap for capping. Also it can suitable for recovery bottles. The performance is stably, operation is convenient. The device is reasonable with high automation capacity. The cap has a special device for remove the reverse caps.

Parameters

No. Model SX-HA
1 Speed 0-100pcs/Min
2 Bottle Diameter 38-100mm
3 Bottle Height 62-240mm
4 Cap  Diameter φ27-φ85mm
6 Power 3KW
7 Steam Pressure 0.4Mpa
9 Weight 800KG
10 Dimension 2350*1450*2150MM


Aautomatic Linear Capping Machine(Screw Cap)


Aautomatic Linear Capping Machine(Screw Cap)This automatic capping machine is used for closing screw caps, it is made up by 3 parts: Cap feeding system, cap loading system and cap closing system.
Linear structure which is flexible to run different size bottles without change parts.
Cap feeding system will be made according to cap sample( by Vibrating bowl or Cap elevator) .
It is also ok for closing pump cap, trigger cap (Cap feeding and loading have to be done by hand).

PLC control system and touch screen is available for your option.

Simple system and easy operation , the machine is widely used on foodstuff,pharmacy, cosmetic, daily chemical, fertilizer and chemical industries.

Application


Aautomatic Linear Capping Machine(Screw Cap) Application

Features


1. Adopt flexible combination design, suitable for different sizes of bottles and caps.
2. For different sizes of caps, it is not necessary to change the spare parts, just simple adjustment is ok.
3. With cap locator, the position of the caps and pump will be the same.
4. Easy operation and adjustment, low cost for maintainance.
5. Designed according to GMP requirement.

Parameters

No. Model SX-A
1 Speed 0-100pcs/Min
2 Cap Type Screw cap
3 Bottle Diameter 35-90mm
4 Bottle Height 50-250mm
5 Cap Diameter 20-50mm
6 Power 2.2KW
7 Air Pressure 0.6-0.8Mpa
8 Voltage 220V 50/60HZ
9 Weight 600KG
10 Dimension 2000mm × 850mm × 2050mm


Automatic Linear Capping Machine(Press cap)


Automatic Linear Capping Machine(Press cap)This automatic capping machine is used for closing press type caps, it is made up by 3 parts: Cap feeding system, cap loading system and cap closing system.
Linear structure which is flexible to run different size bottles without change parts.
Cap feeding system will be made according to cap sample( by Vibrating bowl or Cap elevator) .

PLC control system and touch screen is available for your option.

Simple system and easy operation , the machine is widely used on foodstuff,pharmacy, cosmetic, daily chemical, fertilizer and chemical industries.

Application


Automatic Linear Capping Machine(Press cap) Application

Features


1. PLC&touch screen control, easy to operate
2. Speed of conveying belt is adjustable to synchronous with whole system
3. Stepped lifting device to feed in lids automatically
4. Lid falling part can remove error lids away(by air blowing and weight measuring)
5. All the contact parts with bottle and lids are made of material safety for food
6. The belt to press the lids is inclined, so it can adjust the lid into the correct place and then pressing
7. Machine body is made of SUS 304, meet GMP standard
8. Optronic sensor to remove the bottles which are error capped (Option)
9. Digital display screen show the size of different bottle, which will be convenient for changing bottle(Option).

Parameters

No. Model SX-B
1 Speed 0-100pcs/Min
2 Cap Type Press cap
3 Bottle Diameter 35-90mm
4 Bottle Height 50-250mm
5 Cap Diameter 20-50mm
6 Power 2.2KW
7 Air Pressure 0.6-0.8Mpa
8 Voltage 220V 50/60HZ
9 Weight 600KG
10 Dimension 2000mm × 850mm × 2050mm


Automatic 8 head Rotary Capping Machine


Automatic 8 head Rotary Capping MachineThis capping machine is used for closing plastic caps, especially for the caps which with lock ring. It is widely used in industries like foodstuff, pharmacy, daily chemical, cosmetic, fertilizer etc.

PLC control system, rotary type structure, the machine is with function of automatic cap feeding ,loading and closing.
Machine come with 8 capping heads, can be made for screw type cap or press type cap .
And there is clutch device on the capping heads to assure the capping effect.

For big size bottles like 2 to 5L ,machine will be made with 4 or 6 capping heads accordingly.

Application


Automatic 8 head Rotary Capping Machine Application

Features


- Four claws structure, obtained many patent on technology, suitable for pump caps, trigger caps with straw, duck mouth caps.
- PLC controlled , integrated cap sending ,grasping ,capping ( can affiliate with automatic cap
sorting machine)
- Automatic inlet cap and bottle position-setting and orientation, adjustable torque control.
- Gentle manipulation, no scratch and injury to caps and containers
- Easy changeovers, one line capable of several products
- Connected with filling machine and labeling machine easily
- Module structure, manipulate on the touch screen, easy maintenances
- Suitable for containers made of PET/PP/PE/HDPE and so on
- Production capacity can achieve 4000-8000b/h, higher speed can be customized
- Applicable in detergent, shampoo, shower gel, hand cleaning gel, laundry detergent and many other daily chemical products.

Parameters

No. Model SX-8
1 Speed 5000BPH for 1L bottles
2 Bottle Diameter 40-100mm
3 Bottle Height 60-250mm
4 Cap  Diameter φ20-φ55mm
5 Capping Head 2008/6/4
6 Power 2KW
7 Air Pressure 0.6-0.8Mpa
8 Voltage 220V 50HZ
9 Weight 900KG
10 Dimension 2000*1030*2300MM


Automatic 6 head Rotary Capping Machine


Automatic 6 head Rotary Capping MachineThis capping machine is used for closing plastics screw caps, especially for the caps which with lock ring. It is widely used in industries like foodstuff, pharmacy, daily chemical, cosmetic, fertilizer etc.

PLC control system, rotary type structure, the machine is with function of automatic cap feeding ,loading and closing.
Machine come with 6 capping heads, pneumatic chuck capping head with clutch ,it won’t damage the caps, and use belt to press bottle which also make no damage of the bottle.

High capping speed and capping accuracy.

Application


Automatic 6 head Rotary Capping Machine Application

Features


1) Easy to control and clean.
2) Suitable for different bottles and caps.
3) Automatic feeding bottles and finish capping job.

Parameters

No. Model SXF-6
1 Speed <5000bottles/hour
2 Bottle Diameter 45-90mm
3 Bottle Height 80-280mm
4 Cap Diameter 35-55mm
5 Power 3KW
6 Air Pressure 0.6-0.8Mpa
7 Voltage AC380, 50/60HZ
8 Weight 850KG
9 Dimension 2000*1300*2400MM


Automatic 4-head Aluminum cap Crimping Machine


Automatic 4-head Aluminum cap Crimping MachineThis capping machine is suitable for closing aluminous caps like pilfer- proof aluminous caps.

PLC control system, rotary type structure, the machine is with function of automatic cap feeding ,loading and crimping.

The crimping head is made up by strong stainless steel, by 4-wheel balance principle design, the crimping force is uniformly which makes good sealing effect.

Bottle feeding star wheel equip with clutch device, machine stops automatically if bottle get stuck.

And there is automatic positioning device for bottle neck which assure the capping accuracy and stability.

Application


Automatic 4-head Aluminum cap Crimping Machine Application

Features


1.The machine adopts symmetrical four-side sealing system which can create the even power on each side of the cap;
2.The machine press the cap firstly then turn the tread which can give a better sealing to
bottles.
3.Increased the buffering devices on the adjustable bracket which can adapt to the bottle height in 50mm and no broken, avoid large waste and increase economic benefits.
4.Cork automatic position, sealing wheel strength evenly, good quality sealing.
5.Sealing head pressure big, sealing without slack phenomenon.
6.Smooth operation, low noise, low consumption and high efficiency.
7. Multi-usage, seal security covers and crown covers, twist various slap-up security covers and mineral water covers, just change easily pressure head can work, very simple
8.Has reliable quality, simple operation, easy maintenance and other characteristics.

Parameters

No. Model SFC-4
1 Speed <4000bottles/hour
2 Cap Type Aluminum cap
3 Bottle Diameter 45-90mm
4 Bottle Height 180-320mm
5 Cap Diameter 22-32mm
6 Power 2.5KW
7 Air Pressure 0.6-0.8Mpa
8 Voltage 220V 50HZ
9 Weight 850KG
10 Dimension 2000*1000*2300MM


Plastic Jerry Can Capping Machine


Plastic Jerry Can Capping MachineThis capping machine is suitable for capping 5-25KG Plastic jerry cans with plastic screw caps.

PLC control system, linear type structure, the machine is with function of automatic cap feeding ,loading and closing.

Double air cylinders for container positioning.
Pneumatic chuck capping head with clutch to assure cap effect.

It is an idea machine for capping big size containers.

Application


Plastic Jerry Can Capping Machine Application

Features


1, 304 Stainless steel heavy duty stainless steel welded C frame.
2, All parts contact with material is SUS316, sanitary, Teflon, Viton and hoses per your requirements.
3, Real time adjustable.
4, No bottle no fill, PLC control
5, Accurate filling volume, within ±1% and a total bottle counter.
6, Easy to maintain, no special tools are required.
7, Special seals or hoses by order.
8, Blocked nozzles for products that tend to string and drip.
9, Diving nozzles for bottom up filling of foaming products.
10, Bottle mouth localizer.
11, The filling head can also be added to suit your special need.

Parameters

Nos. Model SFX-1
1 Speed ≤750pcs/Hour
2 Container Diameter ≤320(L)×220(W)mm
3 Container Height 250-450mm
4 Cap Diameter ≤Φ75mm
5 Air Pressure 0.6-0.8Mpa
6 Power 2Kw
7 Voltage AC 380V,50/60Hz
8 Weight About 400Kgs
9 Dimension 2000(L)×1030(W)×2100(H)mm


Star Wheel Type Capping Machine


Star Wheel Type Capping MachineThis automatic capping machine is used for closing screw type caps, it is made up by 3 parts: Cap feeding system, cap loading system and cap closing system.
Rotary star wheel for bottle feeding.
The torque of the capping head is adjustable which is high efficiency and stability.
PLC control system and touch screen is available for option.
The machine is widely used on foodstuff,pharmacy, cosmetic, daily chemical, fertilizer and chemical industries.

Application


Star Wheel Type Capping Machine Application

Features


The function of no bottle no filling in included.
The screw adjuster and digital display make the adjustment of filling volume easy and accurate.
The PLC intellective control system allows you to control the time of filling and capping accurately and the production volume can be accounted.
Optional filling modes are available. The filling heads can fill individually or step by step. And you can even fill different products by different filling heads step by step.
Mechanical transmission can guarantee the machine's stable performance and very rare malfunction.

Parameters

No. Model SX-1
1 Speed <2500bottles/hour
2 Cap Type Screw cap
3 Bottle Diameter 25-90mm
4 Bottle Height 180-280mm
5 Cap Diameter 20-50mm
6 Power 1.5KW
7 Air Pressure 0.6-0.8Mpa
8 Voltage 220V 50HZ


Star Wheel Type Crimping Machine


Star Wheel Type Crimping MachineThis automatic capping machine is used for crimping metal caps onto glass bottles, it is made up by 3 parts: Cap feeding system, cap loading system and cap crimping system.
Rotary star wheel for bottle feeding.
3-Kniefs centrifugal crimping head which is high efficiency and stability.
PLC control system and touch screen is available for option.
The machine is widely used on foodstuff,pharmacy, cosmetic, daily chemical, fertilizer and chemical industries.

Application


Star Wheel Type Crimping Machine Application

Features


Parameters

No. Model SFC-1
1 Speed <2500bottles/hour
2 Cap Type Aluminum cap
3 Bottle Diameter 25-90mm
4 Bottle Height 180-280mm
5 Cap Diameter 20-40mm
6 Power 1.5KW
7 Air Pressure 0.6-0.8Mpa
8 Voltage 220V 50HZ